Shop by Category
Shop by Brand
- Aaeon
- Accel Instruments
- Adlink
- Antaira
- Arbor
- Array
- Asian Electron
- Atek
- Atten
- Bravo Communications
- Diamond Systems
- Digilent -MCC
- Digi International
- Dino-Lite
- Dwyer
- Extech
- GW Instek
- Handywave
- ICS Electronics
- ITECH
- LabJack
- Jewell Instruments
- Juniper
- Lascar
- Micronor Sensors
- Motrona
- MSR
- Numato
- Omega
- Opto22
- ORing
- PowerVar
- Rigol
- Senonics
- Siglent
- Tripp Lite
- TVBTECH
- Twintex
- Vaisala
- Winmate
Dwyer Series 475 Mark III Handheld Digital Manometer
$0.00
Product Tags:
Ranges from 1" w.c. to 150 psid, ±0.5% Accuracy
The SERIES 475 Mark III Handheld Digital Manometer measures positive, negative, or differential pressures of air and natural gases in ranges from 1 in w.c. (0.249 kPa) to 150 psid (10.34 bar). The dual push pads on the front panel control the on/off, auto zero, and pressure unit selection, allowing for simple operation with no set up needed. When used with a Dwyer® Pitot tube, the Series 475 can also be used as an air velocity gage.
Product Applications
- Monitoring natural gas pressures on boilers and other combustion equipment
- Air velocity monitoring, when used with a Dwyer® Pitot tube and AV calculator
- Field calibration of other instruments
- Monitoring or troubleshooting HVAC systems
Specifications
- Service:
- Air and compatible combustible gases.
- Wetted Materials:
- Consult factory.
- Accuracy:
- ±0.5% Full Scale, 60 to 78°F (15.6 to 25.6°C); ±1.5% Full Scale from 32 to 60°F and 78 to 104°F (0 to 15.6°C and 25.6 to 40°C).
- Pressure Hysteresis:
- ±0.1% of Full Scale.
- Pressure Limits:
- See catalog page.
- Temperature Limits:
- 0 to 140°F (-17.8 to 60°C).
- Compensated Temperature Limits:
- 32 to 104°F (0 to 40°C).
- Storage Temperature Limits:
- -4 to 176°F (-20 to 80°C).
- Display:
- 0.42" (10.6 mm) 4-digit LCD.
- Resolution:
- See Ordering page.
- Power Requirements:
- 9 V alkaline battery, installed non-functional, user replaceable.
- Weight:
- 10.8 oz. (306 g).
- Process Connections:
- Two barbed connections for use with 1/8" (3.18 mm) or 3/16" (4.76 mm) I.D. tubing. Two compression fittings for use with 1/8" (3.18 mm) I.D. x 1/4" (6.35 mm) O.D. tubing for 475-7 & 475-8 only.
- Agency Approvals:
- CE, FM.
Features
- Rugged aluminum case protects instrument from damage during transport/use
- Large, easy to read LCD and simple operation
- FM approved to be intrinsically safe in hazardous locations, Class 1, Div 2, Groups A, B, C, D, T4 Ta = 70°C
Options
- -AV Kit includes Model 475 Digital Manometer, Pitot Tube, two No. A-303 static pressure tips with magnetic mounting, 3/16" I.D. rubber tubing, No. A-397 step drill for 3/16" - 1/2" holes in 1/16" increments, No. A-532 AV slide chart, 9 volt battery, and fitted polyethylene case.
