Shop by Category
Shop by Brand
- Aaeon
- Accel Instruments
- Adlink
- Antaira
- Arbor
- Array
- Asian Electron
- Atek
- Atten
- Bravo Communications
- Diamond Systems
- Digilent -MCC
- Digi International
- Dino-Lite
- Dwyer
- Extech
- GW Instek
- Handywave
- ICS Electronics
- ITECH
- LabJack
- Jewell Instruments
- Juniper
- Lascar
- Micronor Sensors
- Motrona
- MSR
- Numato
- Omega
- Opto22
- ORing
- PowerVar
- Rigol
- Senonics
- Siglent
- Tripp Lite
- TVBTECH
- Twintex
- Vaisala
- Winmate
ORing Industrial 18-Port Managed Ethernet Switch IES-3162GC
$0.00
IES-3162GC is the managed Redundant Ring Ethernet switch with 16x10/100Base-T(X) ports and 2xgigabit combo ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. All function of IES-3162GC can be managed centralized and convenient by a powerful windows utility — Open-Vision.
In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Features:
- Fastest Redundant Ethernet Ring : O-Ring(recovery time < 10ms over 250 units of connection)
- Open-Ring supports other vendors' ring technology in open architecture
- O-Chain allow multiple redundant network rings
- *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
- Support Modbus TCP protocol
- STP/RSTP:2004/MSTP supported
- Supports PTP Client (Precision Time Protocol) clock synchronization
- IGMP v2/v3 (IGMP snooping for support) filtering multicast traffic
- Port Trunking for easy of bandwidth management
- SNMP V1/V2c/V3 support for secured network management
- RMON for traffic monitoring
- Support IPV6 new internet protocol version
- Provided HTTPS/SSH protocol to enhance network security
- Support TACACS+ and 802.1x User Authentication for security
*NOTE: This function is available by request only
Specifications:
ORing Switch Model | IES-3162GC |
Physical Ports | |
Gigabit combo Port with 10/100/1000Base-T(X) and 100/1000Base-X SFP Port | 2 |
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 16 |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10Base-T |
MAC Table | 8192 MAC addresses |
Priority Queues | 4 |
Processing | Store-and-Forward |
Switch Properties |
Switching latency : 9 μs |
Security Features |
Enable/disable ports, MAC based port security |
Software Features |
STP/RSTP:2004/MSTP (IEEE 802.1D/w/s) |
Network Redundancy |
O-Ring O-Chain |
Warning / Monitoring System |
Relay output for fault event alarming |
RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1 |
LED Indicators | |
Power Indicator | Green : Power LED x 3 |
R.M. Indicator | Green : Indicates that the system is operating in O-Ring Master mode |
O-Ring Indicator | Green : Indicates that the system is operating in O-Ring mode |
Fault Indicator | Amber : Indicates unexpected event occurred |
10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for Duplex/Collision |
10/100/1000Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for 100Mbps indicator |
100/1000Base-X SFP Port Indicator | Green for port Link/Act. |
Fault Contact | |
Relay | Relay output to carry capacity of 1A at 24VDC |
Power | |
Redundant Input Power | Dual DC inputs. 12~48VDC on 6-pin terminal block |
Power Consumption (Typ.) | 12 Watts |
Overload Current Protection | Present |
Reverse Polarity Protection | Present on terminal block |
Physical Characteristics | |
Enclosure | IP-30 |
Dimensions (W x D x H) | 96.4(W)x108.5(D)x154(H) mm (3.8 x 4.27 x 6.06 inch) |
Weight (g) | 1220g |
Environmental | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operating Temperature | -40 to 70°C (-40 to 158°F) |
Operating Humidity | 5% to 95% Non-condensing |
Regulatory Approvals | |
EMI | FCC Part 15, CISPR (EN55022) class A |
EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
Warranty | 5 years |