Shop by Category
Shop by Brand
- Aaeon
- Accel Instruments
- Adlink
- Antaira
- Arbor
- Array
- Asian Electron
- Atek
- Atten
- Bravo Communications
- Diamond Systems
- Digilent -MCC
- Digi International
- Dino-Lite
- Dwyer
- Extech
- GW Instek
- Handywave
- ICS Electronics
- ITECH
- LabJack
- Jewell Instruments
- Juniper
- Lascar
- Micronor Sensors
- Motrona
- MSR
- Numato
- Omega
- Opto22
- ORing
- PowerVar
- Rigol
- Senonics
- Siglent
- Tripp Lite
- TVBTECH
- Twintex
- Vaisala
- Winmate
MSR165 Data Logger for shock and vibration
$0.00
Product Tags:
Product Tags:
Product Tags:
Product Tags:
Product Tags:
THE bestseller for transportation monitoring, fault diagnoses and load tests! The robust MSR165 data logger is capable of taking 1600 acceleration (shock, vibrations) measurements per second in all three axes for up to five years.
Shock monitoring is possible up to ±15g or up to ±200g, 32 measurement values are recorded even before the event takes place.The rechargeable 800mAh lithiumpolymer battery allows the user to monitor shocks over a period of up to six months. For an even longer recording period of up to five years, the MSR165 can be equipped with long-life batteries.
The installed memory is capable of storing over 2 million measured values, which is sufficient for more than 10.000 shocks. A microSD card (≥4GB) can be used to increase the capacity of the data logger to over 1 billion measured values. All saved measurements can be quickly transferred to a PC or laptop via the USB interface. The basic specification of the MSR165 includes a high resolution 3-axis acceleration sensor. In addition you can also record temperature, humidity, pressure, light and four analogue input signals.
Technical data
Housing: Anodised aluminium case, PC, encapsulated, waterproof (IP67).
Size and weight: 39x23x72mm, approx. 69g
Medium: Air, various liquids
Memory capacity: Over 2m measurement values, expandable to > 1bn.
Colour: Blue, anthracite
Key: Set bookmark or start and stop recording.
Integrated sensor: 3-axis digital accelerometer (13 Bit resolution)
Working range: ±15g or ±200g, -20...+65°C
Accuracy: 15g sensor: ±0,15g (+25°C) 200g sensor: up to 15g ±2g; up to 100g ±5g; up to 200g ±10g (at 25 °C).
Measurement/ storage rate: Up to 1600/s (±15%)
Power supply: Lithium-polymer battery (800 mAh), rechargeable via USB connection, recording period up to 6 months or replaceable batteries (Li-SOCl2, 3.6 V, 2 x 7700 mAh), for recordings up to 5 years.
PC Software: Free Setup, Reader, Viewer- & Online software (Windows XP/Vista/7/8)
Interface: USB
Operating conditions: Temperature -20…+65°C
Storage conditions: Temperature +5…+45°C (ideal storage condition for the battery)
• 10…95% relative humidity, non-condensing
Standards: The MSR165 complies with EU-Directives RoHS/WEEE.