Labjack T7 USB or Ethernet multifunction DAQ device

$1,017.00

USB or Ethernet multifunction DAQ device with 14 analog inputs (16- to 18- bit), 2 analog outputs (12-bit), 23 digital I/O, and up to 10 digital counters/timers.

Multifunction DAQ with WiFi, Ethernet, and USB

Choose the T7 series for ultimate flexibility. With 16 to 24-bit analog inputs, the option to use USB, Ethernet, or WiFi, and numerous built-in firmware features, the T7 Series can help you accomplish nearly any data acquisition need.

It's great for acquiring signals from virtually any kind sensor, and can serve that sensor data out through any of its 3 communication interfaces. With instrumentation amplified inputs, software selectable gain settings, dozens of digital I/O features, and a Modbus TCP front-end, the T7 Series is our most versatile multifunction DAQ platform. Common applications include laboratory research, industrial control and monitoring, automated testing, and prototype development. Additionally, the T7 series devices are capable of stand-alone operation by running Lua scripts.

Hardware Overview

Analog Input

14 Analog Inputs built in (16-24 Bits Depending on Speed & Device Type)
Expand to 84 analog inputs with Mux80 add-on
T7: 16-bit high-speed ADC (up to 100k samples/s)
T7-Pro: 24-bit low-speed ADC (resolution as low as 1uV noise-free)
Software Configurable Resolution Settings
Single-Ended Inputs (14) or Differential Inputs (7)
Analog input ranges: ±10V, ±1V, ±0.1V and ±0.01V
All analog input features are software programmable by configuring the Analog Input Registers
High speed sampling configurable by using Stream Mode. Speeds up to 100kS/s
Low Latency Sampling and Control (less than 1ms) is made easy with Command-ResponseModbus messages
Easy integration with sensors like thermocouples, load cells, bridges, and more ...

Analog Output

2 analog outputs (12-bit, 0-5V)
Waveform generation via Stream Out
Integrated LJTick-DAC support for multiple +/-10V outputs

Digital I/O

23 Digital I/O
Supports SPI, I2C, and more... (Master Only)
5 PWM Outputs with individual phase control
5 Pulse Outputs with configurable number, frequency, and width
2 Frequency Inputs returning both frequency and period
2 Pulse Width Inputs measuring time spent high and low as well as duty cycle
2 Line-to-Line Inputs measuring the time between edges on 2 different lines
4 High-Speed Counters
6 Software Counters with debounce capabilities
3 Pairs of Quadrature Inputs
Many of these DIO Extended Features share pins and cannot be used at the same time. See the DIO Extended Features section of the T7's datasheet

Fixed Current Outputs

200 µA
10 µA

Communication Options

USB
Ethernet
802.11b/g WiFi (T7-Pro only)

Other Highlights

Capable of stand-alone operation by running Lua Scripts
Built-In CJC Temperature Sensor for easy thermocouple temperature readings
Watchdog system
Field Upgradable Firmware
Programmable Startup Defaults
Industrial temperature range (-40 to +85C)
For more information please visit the hardware overview section of the T7's datasheet

Product Variations

T7-Pro vs. T7

The T7-Pro has the following additional features:

802.11b/g WiFi connectivity.
Low-Speed and High-Resolution (24-bit) sigma-delta ADC.
Battery Backed RTC for stand-alone data logging.
Factory Installed microSD card for stand-alone data logging.

OEM Versions

The T7 and T7-Pro come in standard and OEM versions. The OEM versions are intended to be embedded in another device. They are missing the enclosure and most connectors, as it is easier to install connectors than it is to remove them. LabJack can customize the boards to add or remove hardware before shipping, for an additional fee. More information on OEM versions can be found in the OEM Versions section of the T7 Datasheet.

Other Highlights

Each purchase includes lifetime support
Actively monitored and highly informative forums where users can share ideas, ask questions, and get answers from both peers and our technical support staff
Free applications to configure, test, and log data to file
Free examples: C/C++, C#, Delphi, Java, LabVIEW, MATLAB, Python, VB.NET and more...^*
Modbus TCP – Use any platform that supports TCP/IP, no driver required
The free, cross-platform LabJack LJM Library – Extends/wraps the Modbus protocol for convenience
Expansion boards and accessories – Add ±10V DACs, 4-20 mA inputs, terminal boards, relay boards and more...
This all sounds like what I need, but why LabJack?