GW GPT 9904 A.C. 500VA AC/DC Withstanding Voltage/Insulation Resistance/Ground Bond Tester

$0.00

Product Tags:

Electrical Safety Testers

Product Tags:

GW Instek

GW GPT 9904 A.C. 500VA AC/DC Withstanding Voltage/Insulation Resistance/Ground Bond Tester

Features

500VA AC Test Capacity
240x64 Ice Blue Dot matrix LCD
Sweep Function for DUT characteristic analysis
Insulation resistance measurement up to 50GΩ(GPT-9903/9904)
Manual/Auto Mode
Function Key for quick selection
High intensity flash for caution & Status indication
Safety INTERLOCK function
Zero Crossing Turn-on Operation
Controllable Ramp-up Time
True RMS Current Measurement
High resolution: 1uA for measuring current, 2V for setting voltage
PWM amplifier to enhance the power efficiency and reliable testing
Max. 100 memory block for test condition (step) setting. And each step can be named individually.
Remote terminal on the front panel for “start” and “stop” control
Rear panel output available
Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

A Solid Foundation for Reliable, Safe and Practical Safety Compliance Testing

GWInstek is launching a new safety tester family, the GPT-9900 series, with 500VA maximum output capacity to the market. The family of four, including GPT-9904, GPT-9903A, GPT-9902A and GPT-9901A, come joining the GPT-9800 series, which carries 200VA output capacity, to serve the market with higher power demands for the safety tests of electronic products and components. The GPT-9000 series supports the major test items among all the needed for the compliance of the safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety regulations.

The GPT-9900 series is built upon a platform of AC 500VA maximum power output. The GPT-9904 is a 4-in-1 model capable of performing AC withstanding, DC withstanding, insulation resistance and ground bond tests, whereas the GPT-9903A is a 3-in-1 model capable of performing AC withstanding, DC withstanding and insulation resistance tests. The GPT-9902A is capable of performing both AC and DC withstanding tests whereas The GPT-9901A is able to only perform AC withstanding tests.The GPT-9900 series safety tester follows every good feature and advantage of the GPT-9800 series. The high-efficiency PWM amplifier is the core of GPT-9900 platform design to impede the influence from the voltage fluctuation of input AC source. The output voltage is automatically cut off (within 150μs) upon the detection of an abnormal output voltage or a trip of current limits during test to protect the operator from hazardous injury. The GPT-9900 series automatically discharges the DUT after each test to eliminate excessive voltage that remains on the DUT.

Following a tidy and easy-to-use design concept, the GPT-9900 series is equipped with a simple & clear panel layout, a high resolution dot matrix LCD display, and color LED indicators, allowing operators to interpret measurement results easily and quickly. In the role as the complement of 200VA safety testers, the GPT-9900 series is designed upon a 500VA output platform to enhance all major test functions, including AC withstanding (AC 5kV/100mA), DC withstanding (DC 6kV/20mA), insulation resistance (DC 50V ~ 1000V/50GΩ max.) and ground bond (AC 32A max./650mΩ max.) tests, with high-power measurement capabilities. Further more, the test duration, ramp up time and upper/lower limits of the output voltage are fully-adjustable to accommodate a wide variety of safety tests with accurate measurement results. The “Sweep” function of the GPT-9900 series is able to display the test results point by point all through the testing period to form a trace graph. This graphic display performs the characteristic verification of a DUT through observing the parameter response to the changes of the applied voltage or current or testing time. On the graph a movable marker is available to get the parameter reading on the specific point of user’s interest.

Other significant functions and features of the GPT-9900 series include the rear panel output for system applications, the open-circuit detection to ensure proper connections of apparatus for ground bond test, 100 sets of memory to save and recall the panel settings for individual or sequential tests, a remote output on-off terminal in the front panel and a signal I/O port in the rear panel provided as the means for remote start/stop control of the safety tester, and RS-232C, USB and GPIB (optional) interfaces available for PC remote control and test result logging.

AC WITHSTANDING
Output-Voltage Range		0.100kV~ 5.000kV ac
Output-Voltage Resolution		2V/step
Output-Voltage Accuracy		± (1% of setting +5V) [no load]
Maximum Rated Load		500 VA (5kV/100mA)
Maximum Rated Current		100mA (0.5kV < V ≦ 5kV) 10mA (0.1kV ≦ V≦ 0.5kV)
Output-Voltage Waveform		Sine wave
Output-Voltage Frequency		50 Hz / 60 Hz selectable
Voltage regulation		± (1% of reading +5V) [full load → no load]
Voltmeter Accuracy		± (1% of reading+ 5V)
Current Measurement Range		0.001mA~100.0mA
Current Best Resolution		0.001mA / 0.01mA / 0.1mA
AC Current Measurement Accuracy		±(1.5% of reading +30 counts) when HISET < 1.11mA ±(1.5% of reading +3 counts) when HISET ≧ 1.11mA
Window Comparator Method		Yes
ARC Detect		Yes
RAMP (Ramp-Up Time)		0.1~999.9s
TIMER (Test Time)*		OFF, 0.5s~999.9s
Sweep Function*		Yes
GND		ON/OFF
DC WITHSTANDING
Output-Voltage Range		0.100kV~ 6.000kV dc
Output-Voltage Resolution		2V/step
Output-Voltage Accuracy		± (1% of setting +5V) [no load]
Maximum Rated Load		100W (5kV/20mA)
Maximum Rated Current		20mA (0.5kV < V ≦ 6kV) 2mA (0.1kV ≦ V≦ 0.5kV)
Voltage regulation		± (1% of reading +5V) [full load → no load]
Voltmeter Accuracy		± (1% of reading+ 5V)
Current Measurement Range		0.001mA~020.0mA
Current Best Resolution		0.001mA / 0.01mA / 0.1mA
DC Current Measurement Accuracy		±(1.5% of reading +30 counts) when HISET < 1.11mA ±(1.5% of reading +3 counts) when HISET ≧ 1.11mA
Window Comparator Method		Yes
ARC Detect		Yes
RAMP (Ramp-Up Time)		0.1~999.9s
TIMER (Test Time)*		OFF, 0.5s~999.9s
Sweep Function*		Yes
GND		ON/OFF
INSULATION RESISITANCE
Output-Voltage		50V~1000V dc
Output-Voltage Resolution		50V/step
Output-Voltage Accuracy		± (1% of setting +5V) [no load]
Resistance Measurement Range		0.001GW~ 50.00GW
	Test voltage	Measurable Range	Accuracy
	50V≦V≦450V	0.001~ 0.050GW 0.051~ 2.000GW	±(5% of reading +1 count) ±(10% of reading +1 counts)
	500V≦V≦1000V	0.001~ 0.500GW 0.501~ 9.999GW 10.00~ 50.00GW	±(5% of reading +1 count) ±(10% of reading +1 count) ±(15% of reading +1 count)
Window Comparator Method		Yes
Output Impedance		600kW
RAMP (Ramp-Up Time)		0.1~999.9s
TIMER (Test Time)		1s~999.9s
Sweep Function*		Yes
GND		OFF (fixed)
GROUND BOND
Output-Current Range		03.00A~32.00A ac
Output-Current Resolution		0.01A
Output-Current Accuracy		3A≦I≦8A : ± (1% of setting +0.2A) 8A<I≦32A : ± (1% of setting +0.05A)
Test-Voltage		6Vac max. (open circuit)
Test-Voltage Frequency		50 Hz / 60 Hz selectable
Resistance Measurement Range		10mW~650.0mW
Resistance Measurement Resolution		0.1mW
Resistance Measurement Accuracy		± (1% of reading +2mW)
Window Comparator Method		Yes
TIMER (Test Time)		0.5s~999.9s
Sweep Function*		Yes
GND		OFF (fixed)
Test Method		Four Terminal
MEMORY
Single Step Memory		MANU : 100 blocks
Automatic Testing Memory		AUTO : 100 blocks, menu per auto : 16
INTERFACE
Rear Output		Standard
RS232		Standard
USB (Device)		Standard
GPIB		Option
Remote Terminal (Front)		Standard
SIGNAL IO		Standard
General
DISPLY		240 x 64 dot matrix LED back light LCD
POWER SOURCE		AC100V/120V/220V/230V ±10%, 50/60Hz
POWER CONSUMPTION		1000VA max.
DIMENSIONS & WEIGHT		330(W) x 148(H) x 587(D) mm (GPT-9904/9903A), 330(W) x 148(H) x 482(D) mm (GPT-9902A/9901A) approx.27kg(Max)