Shop by Category
Shop by Brand
- Aaeon
- Accel Instruments
- Adlink
- Antaira
- Arbor
- Array
- Asian Electron
- Atek
- Atten
- Bravo Communications
- Diamond Systems
- Digilent -MCC
- Digi International
- Dino-Lite
- Dwyer
- Extech
- GW Instek
- Handywave
- ICS Electronics
- ITECH
- LabJack
- Jewell Instruments
- Juniper
- Lascar
- Micronor Sensors
- Motrona
- MSR
- Numato
- Omega
- Opto22
- ORing
- PowerVar
- Rigol
- Senonics
- Siglent
- Tripp Lite
- TVBTECH
- Twintex
- Vaisala
- Winmate
Bravo Communications LAN/NETWORK PROTECTOR (SINGLE-PORT) - PoE/LAN8G
$0.00
Product Tags:
PoE/LAN8G - Sure/Fire RJ45 Gigabit PoE Protector CAT.6
(Data = 1-8; Power = 1-8 )
Bravo's Sure/Fire Gigabit Power Over Ethernet (PoE) Protector stops all forms of damaging voltage transients (spikes and surges) that are prevalent in typical unshielded twisted-pair cable (UTP) PoE LAN or other UTP network environments, dedicated to delivering a vast array of media traffic.
Applications include Cat.5/Cat.6 LAN, video/control monitoring, remote IP phone integration, remote camera control, remote time clock monitoring and control, as well as a wide range of emerging PoE requirements for remotely powered appliances.
The mass of copper cable segments exposed in a typical LAN/network cable environment act as antennae for attracting (inducing) damaging lightning and electrostatic discharge (ESD) energy waveforms. This phenomena together with the sensitivity of low voltage LAN, video, control, PoE appliances and related circuitry, severely exposes critical systems to the forces of electrical storms, ESD, induced transients, switching transients and various types of line faults.
As part of Bravo's Sure/Fire LAN Protector Product Series, Model PoE/LAN8G is designed as a Gigabit in-line cable port protector that can be easily installed in close proximity to the circuit needing proper protection. The PoE unit has a built-in 12 gauge, 9.0-inch-long grounding wire with a #8 stud size ring terminal for fastening to a proper earth ground.
Model PoE/LAN8G supports 1 Gigabit Ethernet applications ( and up to 2 gigabit data speeds ). The Protector supports DATA on RJ45 connector pins 1 thru 8 as well as POWER on pins 1 thru 8 delivering up to 120 watts of power @ 48V to remote PoE devices, up to 1.25 amps per conductor/wire
Features
- Unique hybrid protection protects All Cat.5 / Cat.6 PoE ports up thru Full Duplex Ethernet.
- Stops all voltage transients greater than ± 68 volts and up to 25K Amps per line in less than a pico-second
- Meets All PoE Standards including IEEE 802.3af and major legacy vendor standards. Supports Both PoE Modes A & B transparently. Expected to meet/exceed pending Standard IEEE 802.3at (PoE Plus) for powering higher wattage devices.
- High-Quality signal design allows UTP speeds up to 250 MHz with straight-thru wiring, protecting 8 signals/wires per port
- Solid State circuitry stops all voltage transients repeatedly and then automatically resets itself.
- Diamond-Shaped Protection Test Light
- Comes in a shielded all metal enclosure.
- Every unit has passed a rigorous set of signal and functional tests.
